home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d11
/
hpiiidrv.arc
/
README.TXT
< prev
Wrap
Text File
|
1991-04-10
|
13KB
|
276 lines
**************************************************************************
**************************************************************************
README FILE FOR HPPCL5A PRINTER DRIVER VERSION 3.77
**************************************************************************
**************************************************************************
This README file contains the following information:
* Installation Instructions
* New Features
* HPPCL5A Printer Driver Enhancements
* User Hints
* HP Personal Peripherals Assist Line
**************************************************************************
INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY ACCOMPANY
THIS DOCUMENT (collectively referred to as the HPPCL5A Printer Driver
Version 3.77) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. The user
assumes the entire risk as to the accuracy and the use of the HPPCL5A
Printer Driver Version 3.77. The HPPCL5A Printer Driver Version 3.77 may be
copied and distributed subject to the following conditions: 1) All text
must be copied without modification and all pages must be included; 2) All
files on the disk must be copied without modification (the DOS utility
DISKCOPY is appropriate for this purpose); 3) All components of the HPPCL5A
Printer Driver Version 3.77 must be distributed together; and 4) the HPPCL5A
Printer Driver Version 3.77 may not be distributed for profit.
Copyright (c) 1990, 1991 Hewlett-Packard Company. All Rights Reserved.
Univers is a product of; and Intellifont is a registered trademark of AGFA
Compugraphic, a division of Agfa Corporation.
Windows is a registered trademark of Microsoft Corporation.
**************************************************************************
INSTALLATION INSTRUCTIONS
**************************************************************************
To install the HPPCL5A Printer Driver:
1. Start Windows 3.0.
2. Choose Control Panel from the Main Group in Program Manager.
The Control Panel window appears.
3. Choose the Printers icon from the Control Panel window.
The Printers dialog box appears.
4. Choose the Add Printer >> button.
5. From the List of Printers: dialog box, select the Unlisted Printer.
Unlisted Printer is the last entry in the List of Printers dialog box.
6. Choose Install.
7. Insert the HPPCL5A Printer Driver Disk Version 3.77.
8. Double click on the installation drive in the "Directories:" list.
9. Double click on HPPCL5A.DRV in the Driver Files list.
10. Choose "New" when asked whether you want to use the current driver or
install a new driver.
11. The entry "HP LaserJet III on None, Inactive" will appear in the
Installed Printers dialog box.
12. Choose Configure.
13. Highlight the correct printer port from the Ports dialog box.
14. Choose Setup.
15. Make any necessary changes in the Printer Setup window to reflect your
printer's configuration.
16. Choose OK twice.
17. Choose Active.
18. Choose OK.
The HPPCL5A printer driver is now installed.
NOTE: Any HP LaserJet III printer you have previously installed will
use the new PCL 5 Printer Driver and Hewlett-Packard Font Installer.
Remove through the Control Panel any HP LaserJet III printer entries
that are not needed.
To remove a printer from the Installed Printers List:
1. Choose Control Panel from the Main Group in Program Manager.
2. Choose the Printers icon from the Control Panel window.
The Printers dialog box appears.
3. Highlight the printer you want to remove.
4. Choose Configure.
5. Choose Remove.
6. Choose Yes when asked if you want to remove the printer.
7. Choose OK twice to return to the Control Panel.
Until you exit Windows 3.0 and then restart Windows 3.0, the
Printer Setup function from the Control Panel is accessed from the
installation disk. Make sure the installation disk for HPPCL5A Printer
Driver Version 3.77 is inserted in the floppy drive whenever you request
Printer Setup from the Control Panel after installing the new Printer
Driver and before exiting Windows 3.0.
**************************************************************************
NEW FEATURES
**************************************************************************
New features included with the HPPCL5A Printer Driver Version 3.77 include:
* Support for the Hewlett-Packard LaserJet IIISi
- Additional Internal Scalable Typefaces
- Memory Selection up to 17 Megabytes
- Output Bin Selection
- Job Separation Selection
* Support for the Hewlett-Packard LaserJet IIIP
- Internal Fonts and Scalable Typefaces
- Dual Input Bin
* Hewlett-Packard Font Installer Including AutoFont Support
Support for the Hewlett-Packard LaserJet IIISi - The Hewlett-Packard
LaserJet IIISi has several features that were not available in previous
Hewlett-Packard LaserJet Printers. When the HP LaserJet IIISi is selected
as the printer in the Printer Setup window, the HPPCL5A Printer Driver
Version 3.77 provides support for these features.
Additional Internal Scalable Typefaces - When the Hewlett-Packard LaserJet
IIISi printer is selected, support for scalable typefaces Zapf Dingbats,
CG Times, Univers, and Univers Condensed in medium, bold, italic and bold
italic treatments is available. Zapf Dingbats is available in the
Series 100, Series 200, Series 300, PS, and Ventura Screen symbol sets.
The other scalable typefaces are available in the Windows symbol set.
From the Printer Setup window you will be able to set the following
options:
Memory Selection up to 17 Megabytes - The available selections
take in to account all of the possible memory configurations using
1 Megabyte and 4 Megabyte SIMMS.
Click on Options in the Printer Setup window to access the following
options:
Output Bin Selection - The Hewlett-Packard LaserJet IIISi has two
output bins, upper and lower.
Job Separation - Job separation is produced by a shift of the
rollers controlled by a PCL command. Job Separation is either on
or off allowing each printout to be offset from the previous
printout.
Notes: International C5 envelope size is not supported on the
Hewlett-Packard LaserJet IIISi Printer. The duplex option will be
available from the Options Box of the Printer Setup window, but will
not work on the printer unless the duplexing option is installed.
Commands are appended to the beginning of every file to change the
printer into PCL mode.
Support for the Hewlett-Packard LaserJet IIIP - When the Hewlett-Packard
LaserJet IIIP is selected as the Printer in the Printer Setup window,
the driver supplies support for the LaserJet IIIP's internal fonts and
scalable typefaces including CG Times and Univers in medium, italic, bold
and bold italic treatments. CG Times and Univers are available in the
Windows symbol set. Also, dual bin support is available for those people
who purchase the optional paper tray.
Hewlett-Packard Font Installer - Scalable typefaces and bitmapped fonts
can now be installed for use in both Windows 3.0 and your Hewlett-Packard
LaserJet III family printer. The Hewlett-Packard font installer installs
typefaces and fonts from the following file types:
.PCM Printer Cartridge Metrics file. This file is created by the
cartridge vendor. PCM files are used for scalable and bitmapped
cartridges that are not supported by the Hewlett-Packard
LaserJet III printer driver.
GLUE.TXT This file contains information for all font products you install
with AutoFont Support. Soft fonts and cartridges, bitmapped and
scalable can be installed from the "glue.txt" file.
When prompted by the HP Font Installer for the drive\directory
from where you want to add fonts, input the drive\directory where
your "glue.txt" file is located (default directory for HP's
AutoFont program and for Type Director is C:\AUTOFONT). The HP
Font Installer reads the "glue.txt" file and displays a list of
the typefaces that have been installed with AutoFont support.
When you add typeface(s), the HP Font Installer creates a .PFM
file for soft fonts and a .PCM for cartridge fonts from the
AutoFont .TFM files. The HP Font Installer installs the .PFM
and .PCM files into Windows 3.0 for access by the printer driver.
.SFP Bitmapped soft font in portrait orientation.
.SFL Bitmapped soft font in landscape orientation.
AutoFont Support - AutoFont support incorporated into the Hewlett-Packard
font installer allows the installation of scalable typeface cartridges,
scalable soft fonts, bitmapped font cartridges and bitmapped soft fonts
into Windows 3.0 without first acquiring a Windows 3.0 metric file.
AutoFont support works by creating the Windows 3.0 metrics files from
the .TFM files installed through AutoFont.
**************************************************************************
HPPCL5A PRINTER DRIVER ENHANCEMENTS
**************************************************************************
Enhancements to the HPPCL5A Printer Driver include:
* Print Model Improvement
* New and Improved Gray Scale Printing
* Font Downloading Optimizations
Print Model Improvement - The print model feature has been improved to
include printing black and white text over the top of other text and
graphic images instead of only on black rectangles.
New and Improved Gray Scale Printing - The gray scale option has been
expanded to include optimal printing of scanned images. There are three
choices in the Gray Scale dialog box in the Printer Setup screen for
printing gray scale graphics: Photographic Images, Line Art Images, and
HP ScanJet Images.
Photographic Images replaces the Gray Scale Graphics On selection
supported in Version 3.61 of the HPPCL5A driver. This method
uses an 8 bit by 8 bit super pixel to emulate 60 levels of gray.
This is up from 32 levels of gray supported in the previous
version of the driver. For improved photographic appearance,
select Photographic Images. Your images will have smooth, soft
looking contrasts between shades of gray. Images originally
designed with color will print better also.
Line Art Images replaces the Gray Scale Graphics Off selection
supported in Version 3.61 of the HPPCL5A driver. This method
uses patterns to emulate 32 levels of gray. It has been
improved from previous versions of the driver by supporting 32
new hand-tuned patterned images. The benefits of this method is
that is has fewer artifacts and a better balance of gray tones
than the old method, yet all of the detail is preserved. Use
this method for images that have a "line draw" look such as clip
art.
HP ScanJet Images is a new option for printing gray scale
graphics. This method uses a variation of the 8 bit by 8 bit
super pixel used in the Photographic Images method. The HP
ScanJet Images option is specially tuned for scanned images
from an HP ScanJet to give exceptional quality and clarity to
the printed images.
You may want to print your graphic images from more than one of
the Gray Scale printing methods. Only you can decide which
method creates the best output for your picture.
Font Downloading Optimizations - The HPPCL5A printer driver now downloads
individual characters of a symbol set to the printer as they are
referenced, rather than sending the entire symbol set at one time.
**************************************************************************
USER HINTS
**************************************************************************
On-line help files are included for the HPPCL5A printer driver and the HP
font installer screens. Choose Help from these screens to access the HELP
information.
**************************************************************************
HEWLETT-PACKARD PERSONAL PERIPHERALS ASSIST LINE
(USA and Canada only)
**************************************************************************
You can call the Hewlett-Packard Personal Peripherals Assist Line weekdays
between 7 a.m. and 6 p.m. (Mountain Standard Time), except for Wednesday
when the hours are 7 a.m. to 4 p.m.:
(208) 323-2551
In Europe, call the Microsoft Customer Support line in your country.